User Manual

7.11 Body fat test method: Press the "PROGRAM" key to select the program BMI, press the "MODE" key
to select the item number, and press the "+" and "-" keys to set the parameters.
a) F1 (Sex)：1 Indicates gender; setting parameter range: 1-2, "1" indicates male, "2" indicates female,
default value: 1;
b) F2 (Age)：Indicates age; setting parameter range: 1-99 years old, default value: 25 years old;
c) F3 (Height) ： Indicates height; setting parameter range: 100-220CM(39-87inch), default value:
170CM(67inch)；
d) F3 (Weight) ： Indicates weight; setting parameter range: 20-150KG(44-330lb), default value:
70KG(154lb);
E) F5 (BMI)：Indicates that the parameter setting is completed and the body fat test state is entered.
Please hold your hands on the heart rate sensors on the left and right handles, wait for 4 seconds,
and the parameter display window will display the body fat percentage (BMI) of the test subject;
according to Asian standards, body fat percentage (BMI) Fat less than 18 is thin, between 18 and
24 is ideal body weight, between 25 and 28 is overweight, and greater than 29 is obese (this data is
only for exercise reference). Default: 24.
8. ERP Conversion function：
The system is powered on by default in ERP mode. When the treadmill is not operated, it will enter the
sleep state in about 4.5 minutes to save power consumption. Press any key to wake up the system. In
standby mode, press and hold the MODE button for about 3 seconds to display ‘2222’ to cancel the ERP
function, and then long press for about 3 seconds to display ‘1111’ to return to the ERP mode.
9. LUBRICATION REMIND FUNCTION.
This machine has a built-in lubrication warning. After running a distance of 300 km, the monitor
will display OIL. This means that your machine needs lubrication. Lubricate the belt as indicated
in the LUBRICATION section and then press any key for 6 seconds. This will clear the warning
and reset the distance until the next lubrication.
21