User Manual

6. During the movement, you can press the “stop” key at any time to stop the motor from running.
7. Preset Mode Use. Turn on the power supply, turn on the power switch, after the display is normal, press
the "Program" button to select one of the automatic running modes as the current mode to run, press
the "Start" button to start the treadmill, and the treadmill starts to run automatically according to the
selected mode. During running, you can press "speed "+" key or "speed "-" key to change the running
speed of the current time period. Press the "Stop" key to abort the movement.
8. Adjustable in two gears if the slope of the treadmill needs to be changed, after the motor stops, incline
the treadmill to a certain height and adjust the rear feet pad.
9. Heart rate test: After the treadmill is powered on, hold both hands on the metal heartbeat sensor, and
the user's heart rate value will be displayed in the heart rate display window after a few seconds.
(Note: This value is not used as medical data and can only be used as a sports reference.)
Grounding guide
This product must have grounding. If error and damage occurred to the treadmill, grounding wire can form
one circuit with lowest resistance; the current can be guided into the ground to reduce the danger of electric
shock. This product is equipped with one cable, which has one grounding conductor and grounding plug.
The treadmill must be grounded with correct socket that is compatible with local rules .
Danger
If you do not know whether the equipment is properly grounded, please
consult a qualified electrician or maintenance personnel. Please do not
change the plug attached to this product without authorization. If the plug is
inconsistent with the socket, let a qualified electrician install a suitable
socket.
It should be under 220-240V and matches with this kind of socket as shown.
Note: When safety key pull out ,the treadmill will stop immediately .And thecomputer can not work ,the
window shows
“
E07
”
.
26