User's Manual
Table Of Contents
- Annex no. 5 (Functional Description - User Manual).pdf
- M90113-10e-PY-B.pdf
- 1 Warnings – Read Before Start-Up!
- 2 Characterization
- 3 Functional Elements
- 4 Mechanical Integration
- 5 Connectors
- 5.1 Connector X1 – Power Supply and MDB Interface
- 5.2 Standby Mode / Wake-Up
- 5.3 Connector X2 – USB Device Interface
- 5.4 Connector X3 – COM 0 (RS232 V.24 Interface)
- 5.5 Connector X4 – USB Host 2 Interface
- 5.6 Connector X5 – Ethernet Interface
- 5.7 Connector X6 - Auxiliary
- 5.8 Connector X7 – USB Host 1
- 5.9 Connector X8 – cVEND SHCR
- 5.10 Connector X9 – COM 2 (RS232 V.24)
- 5.11 SAM Sockets (S1, S2)
- 6 Installation and Setup
- 7 Maintenance and Cleaning
- 8 User Interface
- 9 Technical Data
5 Connectors
Page 24 of 38
External Buzzer:
The external buzzer can be powered by the 5 V DC voltage provided on X6.1. To increase the sound level
and depending on the external buzzer it can also be powered by an external power supply. Observe the
electrical parameters in Table 9: Pin Assignment Auxiliary Connector (X6).
Digital Output:
The digital output is intended to trigger external electronic inputs (e.g. barrier control unit).
Fig. 17: X6 – AUX Schematic
Fig. 18: X6 – Wiring External Buzzer Example
Fig. 19: Circuit Configuration Example