User's Manual
Table Of Contents
- Annex no. 5 (Functional Description - User Manual).pdf
- M90113-10e-PY-B.pdf
- 1 Warnings – Read Before Start-Up!
- 2 Characterization
- 3 Functional Elements
- 4 Mechanical Integration
- 5 Connectors
- 5.1 Connector X1 – Power Supply and MDB Interface
- 5.2 Standby Mode / Wake-Up
- 5.3 Connector X2 – USB Device Interface
- 5.4 Connector X3 – COM 0 (RS232 V.24 Interface)
- 5.5 Connector X4 – USB Host 2 Interface
- 5.6 Connector X5 – Ethernet Interface
- 5.7 Connector X6 - Auxiliary
- 5.8 Connector X7 – USB Host 1
- 5.9 Connector X8 – cVEND SHCR
- 5.10 Connector X9 – COM 2 (RS232 V.24)
- 5.11 SAM Sockets (S1, S2)
- 6 Installation and Setup
- 7 Maintenance and Cleaning
- 8 User Interface
- 9 Technical Data
1 Warnings
Page 5 of 38
1 Warnings – Read Before Start-Up!
Warnings
1.1 Safety Instructions
► The device may only be used for the intended purpose designed by the manufacturer.
► The operation manual should be conveniently kept available at all times for each user.
► Unauthorized changes and the use of spare parts and additional devices which have not been sold or
recommended by the manufacturer may cause fire, electric shocks or injuries. Such unauthorized
measures shall exclude any liability by the manufacturer.
► The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid for the
device. The manufacturer shall not be held legally responsible for inaccuracies, errors, or omissions in
the manual or automatically set parameters for a device or for an incorrect application of a device.
► Repairs may only be executed by the manufacturer.
► Installation, operation and maintenance procedures should only be carried out by qualified personnel.
► Use of the device and its installation must be in accordance with national legal requirements and local
electrical codes.
► When working on devices the valid safety regulations must be observed.
► Special advice for carriers of cardiac pacemakers:
Although this device doesn’t exceed the valid limits for electromagnetic fields you should keep a
minimum distance of 25 cm between the device or the antenna and your cardiac pacemaker.
1.2 Security Instructions
► The information given in the separate document cVEND PIN Security Policy must be observed!
► DO NOT DISASSEMBLE ANY PART!
The device contains a battery-powered security circuit. The security circuit will be triggered if security
relevant parts are disassembled. In this case, the device stops regular operation and can be reactivated
only by the manufacturer in a certified secure environment.