Users Manual Part 1

Device overview
28
To open the maintenance interface, log in to your account, tap ,
and select Maintenance.
The following table describes the function of controls in the
interface:
Item Description
Device
maintenance
Cleaning tool
replacement
Tap to replace the cleaning tool.
Empty
fluidics line
Tap this button and select a flow cell
stage to discharge the residual liquid in
its fluidics line to the waste container.
Self-test
Tap to perform a self-test for the
hardware of the device. The result of
each item is displayed in the interface.
After self-test, you will be prompted
that the self-test is finished.
Door control
Unlock optics
maintenance
door
Tap to unlock the optics maintenance
door.
Only the technical support or trained
personnel can maintain the optical
system.
Unlock
fluidics
maintenance
door
Tap to unlock the fluidics maintenance
door.
Only the technical support or trained
personnel can maintain the fluidics
system.
Shutdown or restart interface
You can shut down or restart the computer in this interface.
To open the shutdown or restart interface, tap and select Shut
down.
About interface
You can view the software version, serial number, and other
information of the device, and the manufacturer information in this
interface.
To open the About interface, tap and select About.