Users Manual Part 1

Preparing samples

We recommend that you use the library preparation system of the

manufacturer to prepare samples. For details, refer to the relevant

user manual.

Preparing the reagent cartridge and

flow cell

Chemicals in reagents and waste might cause personal injury through

contact with the skin, eyes, and mucosa. Follow the safety standards of your

laboratory and wear protective equipment (such as laboratory coat, and

disposable bouffant cap, protective glasses, mask, gloves, and shoe covers)

when performing a sequencing run.

Reagent cartridge and sequencing flow cell

Use only the reagent cartridge and flow cell of the manufacturer for

the sequencing process. You can purchase them as needed from the

authorized sales representatives.

Remove the sequencing reagent cartridge from storage and prepare

it for sequencing. For details, refer to relevant reagent kit user

manual.

After preparing the sequencing reagent cartridge, place it at 2 ℃ to

8 ℃ (35.6 ℉ to 46.4 ℉ ).

If the sequencing reagent cartridge is not used immediately, store the

cartridge at appropriate temperatures as required. Thaw the cartridge

thoroughly before performing a sequencing run.

Washing cartridge and washing flow cell

Washing cartridges are delivered with the device for wash

procedures. Used sequencing flow cells function as washing flow

cells.

For how to prepare the cartridge, contact the technical support. And

for how to perform a wash manually, refer to

Performing a wash on

Page 50

Extra washing reagents are not provided by the manufacturer, but you can

purchase them as needed from the authorized sales representatives.