User's Manual

OBID i-scan

Installation ID ISC.ANT.MUX
FEIG ELECTRONIC GmbH Page 23 of 37 M30201-1de-ID-B.doc
E N G L I S H
6. Safety Instructions / Warning - Read before Start-Up !
• The device may only be used for the intended purpose designed by for the manufacturer.
• The operation manual should be conveniently kept available at all times for each user.
• Unauthorized changes and the use of spare parts and additional devices which have not been
sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such
unauthorized measures shall exclude any liability by the manufacturer.
• The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid
for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors,
or omissions in the manual or automatically set parameters for a device or for an incorrect
application of a device.
• Repairs may only be executed by the manufacturer.
• Installation, operation, and maintenance procedures should only be carried out by qualified
personnel.
• Before opening the device, the power supply must always be disconnected . Make sure that
the device is without voltage by measuring with a test instrument. CAUTION! The fading
illumination of an operational control (LED) should not be used as a sufficient indicator for an
interrupted power supply or the device being without voltage!
• Use of t the device and its installation must be in accordance with national legal
requirements and local electrical codes .