Installation Manual

OBID i-scan
®
Installation ID ISC.ANT1690/600-A/-B
FEIG ELECTRONIC GmbH Page 13 of 41 M91200-1e-ID-B.doc
4.2.3 Installing the Antenna Base and Antenna Body
The antenna will be mounted on the floor. The antenna conductors in the middle of the antenna
body have to have the same direction (Fig. 6). Afterwards, the antenna has to be aligned the
antenna vertically, by using the adjusting screws (Fig. 7).
Fig. 6 Conductors shape have to have same direction
Adjusting screws (hexagon socket width AF 4)
Fig. 7: Attaching and aligning the antenna