Installation Manual

OBID i-scan
®
Installation ID ISC.ANT310310-A
FEIG ELECTRONIC GmbH Page 5 of 22 M90401-1e-ID-B.doc
E N G L I S H
2 Features of the antenna ID ISC.ANT310/310
The Antenna ID ISC.ANT310/310 is a single-loop antenna with manual tuning board.
The antenna has been factory calibrated for the most applications. After having been installed in
other surroundings, the antenna may be re-tuned for a optimal performance with the help of jump-
ers.
In combination with various reader of the Company FEIG ELECTRONIC GmbH, the antenna is
suitable for many Long- and Mid-Range applications with reading performance. At a transmitting
power of 8 W and a transponder in ISO Card size, a reading range of 60-70 cm is possible.
Furthermore, it can be used with other readers having a transmitter frequency of 13.56 MHz and
an output impedance of 50 Ω.
The preferred orientation of a transponder is parallel to the antenna’s surface. The right position to
obtain a maximum range would be above the centre of the antenna’s plane.
Due to its robust design, in conjunction with the protection class IP65, it is for almost all
applications.
Typical application are book and video libraries, document tracking, Label programming, logistic
application at conveyors and sorting systems, access control, people identification and collection of
data in the office or in the Industry.