Installation Manual

OBID i-scan
®
Installation ID ISC.ANT1690/600-A/-B
FEIG ELECTRONIC GmbH Page 36 of 41 M91200-1e-ID-B.doc
6 Technical Data
6.1 Antenna ID ISC.ANT1690/600 - Type A and Type B
Mechanical Data
• Housing UV stabilized ABS and Acrylic
• Dimensions ( W x H x D )
– Antenna
– Packing
600 x 1690 x 75 mm ± 3 mm
800 x 1800 x 150 mm ± 10 mm
• Weight
– ID ISC.ANT1690/600-A
– ID ISC.ANT1690/600-B
Approx. 23 kg without / 28 kg with packing
Approx. 21 kg without / 26 kg with packing
• Enclosure rating IP 43
• Color Antenna frame: clear transparent
Antenna base: signal white RAL 9003
• Mounting
– No. of attaching points
– Recommended anchors
– Recommended minimum load
capacity of the floor fastener
2
∅ 10 mm
5000 N / anchor
• Maximum horizontal load on the top
edge of the antenna
250 N*
Electrical Data****
• Supply Voltage
24 V ± 15 %
Noise Ripple : max. 150 mV
• Power Consumption max. 32 VA
• Operating Frequency 13,56 MHz
• Transmit Power 2W – 12 W
(250 mW Step - Software)
• Modulation 10% - 30% and 100%
(Software configurable)
• Maximum transmitting power per
antenna
8 W