Installation Manual

OBID i-scan
®
Installation ID ISC.ANT1700/740-A /-B
FEIG ELECTRONIC GmbH Page 27 of 40 M91201-0e-ID-B.doc
4.3.2 Reading a Serial Number
Step Action Note
1
Attach a tag to an antenna Use adhesive tape, for example
2
Select „Test and
Measurement“
3
Select „ISO Inventory“
function and activate by
clicking on „Start“.
The serial number and tag
type will be shown in the
display.
4.3.3 Testing the performance
In this test the capture area of the gate antenna described in 4.1 Project Notes is checked. For
other tags or other configurations the indicated ranges and read areas may differ accordingly.
Fig. 13: Performance Test of the gate antenna