Installation Manual

OBID i-scan
®
Installation ID ISC.ANT1700/740-A /-B
FEIG ELECTRONIC GmbH Page 36 of 40 M91201-0e-ID-B.doc
5 Technical Data
5.1 Antenna ID ISC.ANT1700/740 Type A and B
Mechanical Data
• Housing UV stabilized ABS
• Dimensions ( W x H x D )
– Antenna
– Packing
741 x 1700 x 76 mm ± 3 mm
870 x 1800 x 180 mm ± 10 mm
• Weight
– ID ISC.ANT1700/740-A C
– ID ISC.ANT1700/740-B Clear
– ID ISC.ANT1700/740-A Solid
– ID ISC.ANT1700/740-B Solid
Approx. 19,5 kg / 24,5 kg with packing
Approx. 18,0 kg / 23 kg with packing
Approx. 26,5 kg / 31,5 kg with packing
Approx. 25,0 kg / 30 kg with packing
• Enclosure rating IP 43
• Color Antenna frame: signal white RAL 9003
Antenna base: silver grey RAL 9022
• Mounting
– No. of attaching points
– Recommended anchors
– Recommended minimum load
capacity of the floor fastener
2
∅ 10 mm
5000 N / anchor
• Maximum horizontal load on the top
edge of the antenna
250 N*
Electrical Data****
• Supply Voltage
24 V ± 15 %
Noise Ripple : max. 150 mV
• Power Consumption max. 32 VA
• Operating Frequency 13,56 MHz
• Transmit Power 2W – 12 W
(250 mW Step - Software)
• Modulation 10% - 30% and 100%
(Software configurable)