User's Manual

IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Wave -A/-B
Page 22 of 80
7.2 Project Notes People Counter (GPC)
The radar sensor of the People Counter detect moving objects within the detection area / beam
(A1, A2, see Fig. 13) of the radar antenna. The size of the detection area, and hence the sensitivity
of the devices can be adjusted with the ISO-Start Software.
8.2.2 Configuration and Test in ISO-
Host or Buffered Read Mode
A door (including glass doors), a curtain and in particular automatic doors or other moving objects
can influence the counting of the People Counter much.
If a People Counter is installed in the antenna, the antenna conductors in the middle of the antenna
body must be aligned, that the red arrows show, according to
Fig. 8 (Conductors shape have to
have same direction) in the direction of free space.
Fig. 12: Direction of antenna conductor in front of Library door
That means, the antennas are installed close to the entrance and exit, the detection area of the
radar sensors must show away from the door. Otherwise, a minimum distance of 1.0 m between
moving objects and detection areas must be guaranteed.
Library Entrance Door
Library Interior