User's Manual

IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Wave -A/-B
Page 39 of 80
Step
Action
Note
6
Activate antenna 2 with
command: „Function Unit
Commands - Multiplexer“
Parameter:
„Channel Select“
„Cascade Level = 1“
„Output Channel of Input 1
= 2“
7
Confirm with “Send”
8
Repeat Step 3 to 5 for
every further antenna
If the values are not proper, check the following:
 Are all cables pulled tight and will contact well?
 Are the ring cores installed in the antenna cable?
 Are the cables routed as specified?
 Are other RFID systems installed closed by?
 Are there large metal parts close to the antenna (distance < 1.0 m)?
 Are there devices nearby which may emit noise interferences (larger machines or wireless
devices)?
 Are there interferences from the mains?
To determine which devices may be disturbing the gate, briefly disconnect them from the mains.