User's Manual

IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Wave -A/-B
Page 64 of 80
In Notification Mode the Reader sends the People Counter Data automatically to the Host.
8.2.3 Configuration and Test in Notification Mode
The following configuration hast o be done:
Step
Action
Note
1
Select „Configuration“
2
Peripheral Devices
GPC
Mode
Set “Enable Notify Counter”
3
Confirm with „Apply“
4
Operating Mode
Select
-Notification Mode
5
Confirm with „Apply“
6
Set IP Address and Port
for Notification Mode
IP Address of Host
e.g. here: 192.168.3.21
Port:10005
The same TCP/IP Address
and Port Address is valid for
the Notification Chanel of
the People Counter and
Notification Chanel of the
data
7
Confirm with „Apply“