User's Manual

IDENTIFICATION
ID ISC.ANT1710/690 Crystal
Gate Wave -A/-B
Page 67 of 80
Step
Action
Note
1
Select „Configuration“
2
Operating Mode
Select
-Buffered Read Mode
or
-Notification Mode
3
Confirm with „Apply“
4
Operating Mode
Set
-Trigger enable
-Source Input No 2-Trigger
TriggerUse set to
- Start Trigger
- Hold Time
e.g. 20x100ms =2sec.
5
Confirm with „Apply“
6
Multiplexer stops switching
of antennas. All Output
LED´s at Outputs of
Multiplexer are switched
off.
7
Walk through the gate.
Multiplexer/Gate will be
switch on for the set time.