User's Manual

IDENTIFICATION
Installation
ID ISC.ANT1520/700-HPDA/-HPDB
FEIG ELECTRONIC GmbH Page 28 von 92 ID ISC.ANT1520700-HPDA-B
User Manual_M61113-0e-ID-
E.doc
6.3 Gate Configuration and Setup using Antennas
6.3.1 Required Components
To set up the gate you need the following components:
- Qty. 1 ID ISC.ANT1520/700-HPDA Crystal Gate (Base)
(incl. Qty. 1 ID ISC.NET24V-B Power Supply Unit)
- Qty. 1 ID ISC. ANT1520/700-HPDB Crystal Gate
- Power cable, interface cable and connection cable for the DC power supplies (2-wire,
twisted)
- Mounting materials (screws, anchors)
To calibrate the Reader you will need the software
- ISOStart 217 Bibliotheca Version 09.09.09 or higher
and for tuning the antennas the service software
- DATuningTool Version 1.02.02 or higher
on a personal computer running under Microsoft
®
Windows
®
. The service can be downloaded at
the Download Area of the Homepage
www.feig.de.