User's Manual

IDENTIFICATION
Installation
ID ISC.ANT1520/700-HPDA/-HPDB
FEIG ELECTRONIC GmbH Page 30 von 92 ID ISC.ANT1520700-HPDA-B
User Manual_M61113-0e-ID-
E.doc
Fig. 15: Terminal board
An overview of the terminal board assignment is given in 9.
Annex A
Note:
• A reverse polarity could damage the device or the In-/Outputs.
The connection between Antenna Type A and Type B must be made with the data cable
which is content of the Antenna Type B. The ferrite core should have 3 turns of the cable
approx. 7cm at the cable end.
• Fig. 16: Terminal board