User's Manual

IDENTIFICATION
Installation
ID ISC.ANT1520/700-HPDA/-HPDB
FEIG ELECTRONIC GmbH Page 75 von 92 ID ISC.ANT1520700-HPDA-B
User Manual_M61113-0e-ID-
E.doc
7.2.4 Using the trigger function of the Gate People Counter
The trigger function could only be used in one of the Automatic Modes.
The trigger function works bidirectional, but a 100% safe reading of transponder is only
possible form one direction. Due to this, it is necessary at the installation of the antennas,
that the Radar module / Antenna faces to the direction of the transponder which could
cause the alarm. At buildings (e.g. Libraries) the Radar module faces into the building.
Otherwise the reading of the transponder will just be started, when the person/transponder
is already in or outside the gate.
Fig. 29
Fig. 30
Valid Transponder
Exit of Building
Long Range Reader
ID ISC.LRM2500-B
X2 IN2+/IN2-
ANT1520680-HPDA