User's Manual

OBID i-scan
®
Installation ID ISC.LRU2000
FEIG ELECTRONIC GmbH Page 48 of 56 M60801-0de-ID-B.doc
E N G L I S H
2.9.3 Network connection
2.9.3.1 LAN (only device versions with ACC)
The Reader has an integrated 10/100Tbase network port for an RJ45. Connection is made on X11.
With structured cabling Cat 5 cables should be used. This ensure reliable operation at 10Mbps or
100Mbps.
Pin configuration for X8 (network interface):
Terminal Abbreviation Description
1 TX+ Transmit Data +
2 TX- Transmit Data -
3 RX+ Receive Data +
4 VETH+ n.c.
5 VETH+ n.c.
6 RX- Receive Data -
7 VETH- n.c.
8 VETH- n.c.
Table 2-13: Ethernet interface pin-outs
2.9.4 CompactFlash Slot (only device version with ACC)
The Reader has a CF2 slot (connector X12). This slot is for future use by CompactFlash cards.