Manual instruction

12
en
Type AMM 500 Plus (**)
Order number 7 129 ...
Rated voltage 18 V
Rated oscillation rate 11000 – 18500 /min
Amplitude 2 x 1.7°
Weight according to EPTA-Procedure 01 2.9 lbs (1.3 kg)
Type B18A B18A
Battery type Lithium ion (Li ion) Lithium ion (Li ion)
Rated voltage 18 V 18 V
Weight according to EPTA-Procedure 01
(Battery)
1.0 lbs (0.45 kg) 1.5 lbs (0.70 kg)
Battery charger ALG 30, ALG 50, ALG 80 (**)
13
en
Assembly instructions.
Before mounting or replacing application tools or accessories, remove the bat-
tery. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Removing and charging the battery
(figure 2).
Prior to the first charging procedure,
read the operating instructions of the
battery charger.
Charge the battery completely before
putting into operation for the first time.
Release the battery by pressing the battery-
unlocking button and pull the battery out of
the handle. Do not exert any force when
doing this.
Connect the battery charger to a socket out-
let, slide the battery onto the battery charger
and charge the battery. After the charging
process is over, insert the battery into the
power tool and pull the plug of the battery
charger out of the socket outlet.
A new battery does not reach its full capacity
until after several charging and discharging
procedures.
WARNING
2.
Fig. 2
Battery
Battery-Unlocking button
1.