Manual instruction

20
en
Setting the speed (figure 7).
The speed range can be variably adjusted, as
shown in the following figure.
Turn the dial control between “1” for the
lowest speed and “6” for the highest speed.
Securing the workpiece (figure 8).
Secure the workpiece sufficiently. An
inadequately secured workpiece can, for
example, cause the grinding accessory to
jam. This can lead to kickback, cause the
workpiece to fall down, and lead to
other dangerous situations.
2 500 rpm
3 900 rpm
5 300 rpm
6 700 rpm
8 100 rpm
9 500 rpm
2 700 rpm
CG 13-150 PDEV (**):
CG 10-115 PDEV (**):
4 200 rpm
5 700 rpm
7 200 rpm
8 700 rpm
10 500 rpm
2
1
3
4
5
6
CG 13-150 PDEV (**):
CG 10-115 PDEV (**):
8 100 rpm
8 700 rpm
5 300 rpm
6 700 rpm
5 700 rpm
7 200 rpm
3 900 rpm
4 200 rpm
9 500 rpm
10 500 rpm
2 500 rpm
2 700 rpm
2
1
3
4
5
6
Dial control for speed adjustment
Fig. 7
Fig. 8
OBJ_BUCH-0000000331-002.book Page 20 Thursday, June 27, 2019 3:07 PM