Instructions for use

23
en
For your safety.
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Do not use this power tool before you have
thoroughly read and completely understood this
Instruction Manual and the enclosed “General
Safety Instructions” (document number
3 41 30 054 06 1). The documents mentioned should
be kept for later use and enclosed with the power tool,
should it be passed on or sold.
Please also observe the relevant national industrial
safety regulations.
Intended use of the power tool:
Hand-guided angle grinder for dry grinding, wire brush-
ing and cutting of metal and stone as well as for drilling
tiles in weather-protected environments without the
use of liquid coolants, using the application tools and
accessories recommended by FEIN.
This power tool is also suitable for use with AC gener-
ators with sufficient power output that correspond to
the Standard ISO 8528, design type G2. This Standard
is particularly not complied with when the so-called dis-
tortion factor exceeds 10 %. When in doubt, please
refer to the generator instruction/specification guide.
Character Unit of measurement,
international
Unit of measurement,
national
Explanation
n /min, min
-1
, rpm,
r/min
rpm Rated speed
P
1
W W Power input
P
2
W W Output
U VVRated voltage
f Hz Hz Frequency
M... mm mm Size of metric thread
Ø mm mm Diameter of a round part
mm mm Ø
D
=Max. diameter of grinding/cutting disc
Ø
H
=Diameter of mounting hole
T=Thickness of grinding/cutting disc
mm mm Ø
D
=Max. sanding pad diameter
mm mm M=Thread for clamping flange / application
tool
l=Length of mounting thread
mm mm Ø
D
=max. cup brush diameter
M=Thread for clamping flange / application
tool
T=max. wire length
mm mm Ø
D
=Max. tile drill diameter
M=Thread for clamping flange / application
tool
kg kg Weight according to EPTA-Procedure 01
L
pA
dB dB Sound pressure level
L
wA
dB dB Sound power level
K... Uncertainty
m/s
2
m/s
2
Vibrational emission value according to
EN 60745 (vector sum of three directions)
h,AG
m/s
2
m/s
2
Mean vibrational value for angle grinding
h,DS
m/s
2
m/s
2
Mean vibrational value for sanding with sand-
ing sheet
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
2
°
m, s, kg, A, mm, V,
W, Hz, N, °C, dB,
min, m/s
2
°
Basic and derived units of measurement from
the international system of units SI.
WARNING