Manual instruction

Assembly instructions.

Before mounting or replacing cutting tool or accessories, pull the power plug.

This preventive safety measure rules out the danger of injuries through acci-

dental starting of the power tool.

For all work or when changing application tools, always wear protective gloves.

Danger of injury from the sharp edges of the application tools. Application

tools can become very hot while working. Danger of burns!

Replacing the collet (figure 4).

Hold the spindle in place using an open-end

wrench (size 17 mm) and unscrew the collet

using another open-end wrench (size 13

mm).

Replace the collet and and tighten it using the

open-end wrench (size 13 SW).

WARNING

CAUTION

17 mm

13 mm

Fig. 4

Collet

Open-end wrench

Collet