Product datasheet

Page 1 / 4
Price includes
Product feature
JME Holemaker III
Endurance magnetic base drill up to 1-3/8
in [35 mm]
The optimal drilling solution with high powered German
motor designed for use with Carbide and HSS cutters for
toughest jobs and applications.
Product number: 7 270 59 61 09 0
Details
Extemely wear resistant concept with durable
newly designed polyurethane motorhousing for
use in industry and manual trades.
F
Extemely lightweight drill yet powerful enough
for heaviest drilling applications.
F
Cost effective drill for use with Carbide cutters
which offer longer life, higher cutting rate and
capable of cutting harder materials. Also running
with standard HSS cutters with great results.
F
Optimum power-to-weight ratio.F
Integrated coolant tank.F
Drill motor does not start for material
thicknesses less than 3/16 [4] in[mm] if the
magnetic holding force is too low.
F
Pivoting motor cable.F
Higher RPM for optimal use with carbide
cutters.
F
Hand feed wheel can be mounted either side.F
Integrated hexagon socket holder.F
1 coolant tank
L
1 safety strap
L
2 pilot pins
L
1 chip guard
L
2 hexagonal socket keys, 5 and 6
mm
L
1 hexagonal socket keys with T-
grip, 5 mm
L
1 case
L
Hand feed wheel can be mounted
on either side
L