Product datasheet

Page 1 / 2

Price includes

Product feature

RDG, 18-3a

Pipe milling cutter for pipes with

diameters of between 250 mm and 3000

Powerful pneumatic pipe milling machine with a feed of

40 mm/min for pipes with diameters of up to 3000 mm.

Product number: 7 560 23 00 00 9

Details

Sawing oil, gas and water pipes made from steel

and cast iron up to a wall thickness of 45 mm.

Milling oil, gas and water pipes made from steel

and cast iron up to a wall thickness of 30 mm

(with 2 revolutions).

Motor drive parts made from stainless material.

The compressed air motor's ns are resistant to

swelling.

Can be used in shallow water following testing.F

Simple setup.F

Autonomous machine working.F

1 transport container

1 metal tool case

1 hand crank

10 splitting wedges

20 bolts

20 circlips

10 chain pieces (length 31.75

mm)

1 set of keys

1 can of oil

1 maintenance unit with hose

2 transport straps

Plate 32433027017 mounted

Pneumatic drive

PAGE 1
RDG, 18-3a Pipe milling cutter for pipes with diameters of between 250 mm and 3000 mm Powerful pneumatic pipe milling machine with a feed of 40 mm/min for pipes with diameters of up to 3000 mm. Product number: 7 560 23 00 00 9 Details F F F Sawing oil, gas and water pipes made from steel and cast iron up to a wall thickness of 45 mm. Milling oil, gas and water pipes made from steel and cast iron up to a wall thickness of 30 mm (with 2 revolutions). swelling.
PAGE 2
Application ss Pipe processing up to diameter of 3000 mm s Can be used at temperatures permanently below 0°C Sawing steel pipes up to a wall thickness of 45 mm ss Sawing cast pipes up to a wall thickness of 22 mm ss Milling steel pipes up to a wall thickness of 30 mm ss Milling steel pipes up to a wall thickness of 15 mm ss s Use in water applications s suitable s s well suitable Technical data TECHNICAL DATA Operating pressure 6 bar Air consumption 4.