Owner manual

WWW.FEISOL.NET

Page 1 of 2

User Manual ► FEISOL Bicycle Mount

A. User Instructions

The bike mount is shipped un-assembled - please use the following instructions for

assembling:

First, use the enclosed 3mm hexagonal wrench to attach the mount bracket on the bike

handle bar. Do not screw in tightly yet. Then, use the enclosed 2.5mm hexagonal wrench to

lock the mounting platform onto the bracket tightly, as shown in photo #1. Adjust the bracket

angle (camera angle) to the desired position, and then tighten all the screws to fix bike

mount into place.

First, use the enclosed 3mm hexagonal wrench to attach the mount bracket on the bike

handle bar. Do not screw in tightly yet. Then, use the enclosed 2.5mm hexagonal wrench to

lock the mounting platform onto the bracket tightly, as shown in photo #1. Adjust the bracket

angle (camera angle) to the desired angle, and then tighten all the screws to fix bike mount

into place.

PAGE 1
User Manual ► FEISOL Bicycle Mount A. User Instructions The bike mount is shipped un-assembled - please use the following instructions for assembling: First, use the enclosed 3mm hexagonal wrench to attach the mount bracket on the bike handle bar. Do not screw in tightly yet. Then, use the enclosed 2.5mm hexagonal wrench to lock the mounting platform onto the bracket tightly, as shown in photo #1.
PAGE 2
B. Further Instructions: If mounting a larger camera or a camera/lens combination, you should first attach a ball head to the mounting platform. Attention: 1. Safety first! It is not recommended that you take photos while riding your bicycle. 2. This bike mount is recommended for smooth road surfaces only. Using it on rough surfaces may damage your photographic equipment. 3.