User Manual

WWW.FEISOL.NET

Page 1 of 2

User Manual ► FEISOL Ball Heads

The following manual applies to all FEISOL Ball Heads

(1) Friction Control Knob

(2) Ball Head Lock / Release Knob

(3) Panning Base Lock Knob (except CB-30C)

(4) Quick Release Lock Knob

Note

No tools are needed for operating any of these knobs. Use of tools may cause damage and

void the warranty.

Do not carry your tripod and Ball Head with a camera / lens attached. Ball Heads are

designed to work only stationary.

PAGE 1
User Manual ► FEISOL Ball Heads The following manual applies to all FEISOL Ball Heads (1) Friction Control Knob (2) Ball Head Lock / Release Knob (3) Panning Base Lock Knob (except CB-30C) (4) Quick Release Lock Knob Note No tools are needed for operating any of these knobs. Use of tools may cause damage and void the warranty. Do not carry your tripod and Ball Head with a camera / lens attached. Ball Heads are designed to work only stationary. © FEISOL INC, USA WWW.FEISOL.
PAGE 2
A. Panning Base For optimal use of the Panning Base Function, turn the Lock Knob (3) only slightly. Opening the Lock knob too far may cause instability. To make possible precise adjustments, FEISOL Ball Head feature a graded scale at the bottom of the Panning Base. B. Friction Control Friction is set by adjusting the Friction Control Knob (1). In order to select the desired degree of friction , the Ball Head Lock/Release Knob (2) must first be turned to its fully locked position.