Installation Guide

1
Installation Instructions for
GP I :ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally ecognized esting aboratory”NR TL
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
Place the fixture base and washer over the threaded nipple, then secure them in place by screwing the threaded pipe
to the threaded nipple.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Place the shade over the threaded pipe and secure it in place by tightening the finial.
1
2
1A
3
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1
THREADED NIPPLE
MOUNTING PLATE
1
THREADED PIPE
Allier 2 Light Flush Mount
1.0
F 400M
Ceiling
F 400_M
LAMP
WASHER
4
FINIAL
SHADE
2
3
4
2
FIXTURE BASE
4