Installation Sheet

ManualsBrandsFeiss Collection ManualsCeiling LightsFeiss Broderick 4 Light 11" Wide Semi-Flush Ceiling Fixture

Installation Instructions for

Install the candle tubes by sliding them over the sockets.

Install the candle followers by placing them on top of the candle tubes.

Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.

Install the glass panels by carefully inserting them into the fixture and securing them with the provided brackets and screws.

Follow enclosed supplement installation instructions for electrical and fixture installation onto house junction box.

Broderick Semi Flush Mount

1.0

SF347

Ceiling

SF347

CAUTION RISK OF FIRE-

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing compliant junctionNEC

boxes.

This product is safety listed for damp locations.

Incandescent lamps may be dimmed with a standard incandescent dimmer.

LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for

additional information.

This instruction shows a typical installation.

LAMP

GLASS PANEL

JUNCTION BOX

CANDLE FOLLOWER

CANDLE TUBE

SCREW

GLASS PANEL

BRACKET

Summary of content (4 pages)

PAGE 1
Installation Instructions for SF347 Broderick Semi Flush Mount SF347 Ceiling GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. Incandescent lamps may be dimmed with a standard incandescent dimmer. LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer for additional information.
PAGE 2
ATTENTION : RISQUE D'INCENDIE Ce produit doit être installé conformément au code d'installation en vigueur par une personne familière avec la construction et l'exploitation du produit et les risques qu'il entraîne. Utiliser les conducteurs d'alimentation supérieure à 90° c. 1A BOÎTE DE JONCTION PANNEAU DE VERRE 3 AMPOULE 2 SUIVEUR DE BOUGIE 1 TUBE DE BOUGIE PANNEAU DE VERRE SUPPORT VIS 4 1 Installez les tubes de bougie en les glissant sur les douilles.
PAGE 3
PRECAUCIÓN: RIESGO DE INCENDIO Este producto debe instalarse de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y operación del producto y los riesgos que conllevan. Utilizar conductores de suministro mínimo 90° c. 1A CAJA DE JUNCTURA PANEL DE VIDRIO 3 BOMBILLA 2 SEGUIDOR DE VELA 1 TUBO DE VELA PANEL DE VIDRIO SOPORTE TORNILLO 4 1 Instale los tubos de la vela deslizándolos sobre los zócalos.
PAGE 4
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 60077 800.969.3347 www.Feiss.com © 2017 Feiss.All rights reserved.The "Feiss" graphic is a registered trademark of Feiss. Feiss reserves the right to change specifications for product improvements without notification.