Instructions / Assembly

(E) 3/06
ASSEMB LY I NST R UCT I ONS FOR F2076/6
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
1.  Carefully remove all parts from box and 
 remove wrappings. NOTE: DO NOT 
 YET REMOVE WRAPPINGS  
 SURROUNDING ARMS. Carefully 
 lay parts on a non-abrasive surface and 
 identify all parts before assembly. Bulb 
 not included.
2.  Spread open all arms so they are equally 
 spaced apart to each other.
3.  A. While one person holds top section 
 of arms neatly bunched together, slip 
 notched cover from above and secure all 
 L shaped pins inside of it's notches.
 B. Remove all wrappings from arms.
 C. Screw the long threaded end of spacer 
 tube through the notched cover. Then 
 secure all together by fastening fixture loop 
 from above.
4. Follow enclosed supplement installation  
instructions for electrical and fixture  
installation onto house outlet box. If you do
not have an outlet box at desired location to
attach the fixture than hire a qualified
electrician to create one. 
5. Install threaded stud into finial. Then fasten
finial by screwing onto bottom of fixture.
6.  Place shade over threaded socket then
spacer ring and secure with counter ring.
7. Install bulbs (not included). See relamping
label located near socket area for type and
maximum allowed wattage.
Fixture Loop
Fixture Wires
& Ground Wire
Spacer Tube
Notched Cover
Threaded Stud
Finial
Bulb
(not included)
Counter Ring
Spacer Ring
Arm
Socket
2
3
4
7
6
5
MUR R AY FEI SS
©M UR R AY FEI SS I M PO RT LL C.
A Quality Home Brands Company®
Shade