Manualshelf

Instructions / Assembly

ManualsBrandsFeiss ManualsLightingAmato 2-Light Oil-Rubbed Bronze Pendant
1234
1
Installation Instructions for
Amato 2, 3 and 4 Light Chandelier
1.0
F3053-2_F3054-3_F3055-4_F3056-2_F3057-3
Chandelier
F3053/2 F3054/3, F3056/2,
F3057/3, F3055/4
GP I :ENERAL RODUCT NFORMATION
This product is listed by one of the following
“ ationally ecognized esting aboratory”NR TL
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is suitable for dry locations only.
This product may be dimmed with a standard incandescent dimmer.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Place the upper shade into the upper frame and place them onto the upper pipe, then secure them in place by screwing
the fixture loop onto the upper pipe.
Feed the cord through the upper pipe and screw the upper pipe to the top of the socket.
Screw the lower pipe to the bottom of the socket.
Place the lower shade into the lower frame, secure it using the tabs, and place them onto the lower pipe, then secure
them in place by screwing the finial onto the lower pipe. CAUTION: Do not over tighten, the glass may break resulting
in injury.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
2
1A
3
CAUTION - RISK OF FIRE
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
4
5
6
6
FIXTURE LOOP
2
SOCKET
5
4
UPPER FRAME
UPPER SHADE
UPPER PIPE
LAMP
LOWER PIPE
LOWER SHADE
LOWER FRAME
FINIAL
3
1

Summary of content (4 pages)