Instructions / Assembly

ManualsBrandsFeiss ManualsChandeliersAllier 38 in. W. 6-Light Weathered Oak Wood and Antique Forged Iron Chandelier

Installation Instructions for

Allier 6 Light Chandelier

1.0

F3186-6

Chandelier

F3186/6_

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing compliantNEC

junction boxes.

This product is safety listed for damp locations only.

Incandescent lamps may be dimmed with a standard incandescent dimmer.

LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer

for additional information.

Screw the stem to the fixture, then screw the stem to the frame.

Open the folded arms evenly.

Install the fixture arms to the fixture frame and secure them together using Allen screw.

Install the cover to the bottom of the fixture and secure it in place using the finial

Install the candle tubes by slipping them through the sockets.

Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.

Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.

CAUTION RISK OF FIRE-

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

LAMP

SOCKET

CANDLE TUBE

STEM

FRAME

FIXTURE

CUP

FINIAL

Summary of content (4 pages)

PAGE 1
Installation Instructions for F3186-6 Allier 6 Light Chandelier F3186/6_ Chandelier GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. This product is safety listed for damp locations only.
PAGE 2
ATTENTION : RISQUE D'INCENDIE Ce produit doit être installé conformément au code d'installation en vigueur par une personne familière avec la construction et l'exploitation du produit et les risques qu'il entraîne. Utiliser les conducteurs d'alimentation supérieure à 90° c. 1A 7 CADRE 3 1 TIGE 6 AMPOULE 5 TUBE BOUGIE DOUILLE 1 LUMINAIRE 3 COUPE 4 FLEURON 1 Vissez la tige sur le luminaire, puis vissez la tige à le cadre. 2 Ouvrez les bras pliés uniformément.
PAGE 3
PRECAUCIÓN: RIESGO DE INCENDIO Este producto debe instalarse de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y operación del producto y los riesgos que conllevan. Utilizar conductores de suministro mínimo 90° c. 1A 7 MARCO 3 1 TALLO 6 BOMBILLA 5 TUBO DE VELA ENCHUFE 1 LÁMPARA 3 COPA 4 FINIAL 1 Atornillar el tall y la lámpara, luego atornillar el tallo a la asamblea superior. 2 Abrir los brazos cruzados de manera uniforme.
PAGE 4
SAVE THESE INSTRUCTIONS! 555 Theodore Fremd Ave Suite B101 Rye, NY 10580 800.969.3347 www.Feiss.com © 2017 Feiss.All rights reserved.The "Feiss" graphic is a registered trademark of Feiss. Feiss reserves the right to change specifications for product improvements without notification.