Installation Guide

Carefully unpack and identify all parts
before assembly.
1. Lay the frame, with screw holes side
facing up, on a non-abrasive surface.
2. Gently lay the glass mirror, (mirror side
down) onto the frame. Then lay the glass
mirror cover onto the frame.
3. Secure the glass mirror cover onto the
frame with screws, tabs, and bracket.
4. At the desired wall location, install two
picture frame hangers into wall at
corresponding position with two hanging
loops. Note: Use a level to insure
mounting position is horizontal or
vertical.
5. Carefully hang mirror onto wall.
Assembly Instructions For
2
4
3
1
MR1107
(E) 11/11
J Hook included
in hardware bag