Instructions / Assembly

1
Outdoor
1
2
1A
3
4
5
Installation Instructions for
Lindbergh Outdoor Post
1.0
OL14504
OL14504
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
Install the candle followers by placing them on top of the candle tubes.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage information.
Insert the glass panels through the bottom of the fixture and into the brackets at the top of the fixture, then secure them in
place using the clips.
Install the frame onto the fixture and secure them together using the frame screws.
6
CAUTION RISK OF FIRE-
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
GP I :ENERAL RODUCT NFORMATION
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED LEDlamps may be dimmed with a dimmer. Consult lamp manufacturer for
additional information.
This instruction shows a typical installation.
2
POST
POST SCREW
3
4
FIXTURE
4
GLASS PANEL
8
FRAME SCREW
LAMP
FRAME
CLIP
7
7
CANDLE FOLLOWER
BRACKET
8
6
5
7