Instruction Sheet

1
1
2
3
4
Installation Instructions for
Belleville Outdoor Post
1.0
OL15307
OL15307
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Secure the fixture to the post with the post screws making sure to neatly tuck in all wiring.
Insert the glass panels through the bottom of the shade, then secure them in place using the clips.
Place the shade onto the fixture and secure them together using the shade screws.
Install the door glass by sliding it into the door.
Screw the lamps into the sockets. Refer to the label on the socket for max wattage information.
1A
POST
POST SCREW
Outdoor
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
2
3
8
5
6
7
8
SHADE SCREW
POST SCREW
CLIP
GLASS PANEL
DOOR GLASS
DOOR
SHADE
FIXTURE
LAMP
5
7
6
GP I :ENERAL RODUCT NFORMATION
This product is safety listed for wet locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer
for additional information.
This instruction shows a typical installation.