Manualshelf

Instruction Sheet

ManualsBrandsFeiss ManualsLightingBelleville Medium 4-Light Textured Black Hanging Pendant with Clear Glass Panels
12
1
Installation Instructions for
1.0
OL15309
OL15309
Insert the glass panels through the bottom of the fixture, then secure them in place using the clips.
Install the cover to the bottom of the fixture and secure it in place with the cover screws.
Install the door glass by sliding it into the door.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.
Determine the wanted height or look of the fixture with the provided stems and pivot, then assemble them by screwing them
together.
Feed the fixture wires through the stem assembly and screw it onto the fixture.
Unscrew the collar nut off the screw collar and place it onto the stem followed by the canopy.
Screw the screw collar onto the threaded nipple.
Feed the fixture wires through the threaded nipple and screw the mounting plate assembly onto the stem assembly.
Align and secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the canopy onto the mounting plate and secure it in place by screwing the
collar nut tightly onto the screw collar.
1
2
1A
3
COLLAR NUT
DOOR GLASS
COVER SCREW
FIXTURE
4
3
2
Belleville Outdoor Lantern
Outdoor
CAUTION RISK OF FIRE-
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant junction
boxes.
This product is safety listed for damp locations.
Incandescent lamps may be dimmed with a standard incandescent dimmer.
LED lamps may be dimmed with a LED dimmer. Consult lamp manufacturer
for additional information.
GLASS PANEL
CLIP
LAMP
STEM ASSEMBLY
PIVOT
SCREW COLLAR
THREADED NIPPLE
MOUNTING PLATE
5
6
7
8
13
12
9
10
11
12
13
14
CANOPY
1
6
5

Summary of content (2 pages)