Installation Guide

(E) 4/07
ASSEMBLY INSTRUCTIONS FOR OL5411, OL5412
Bulb
(not included)
Candle
Tube
Top Cover
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Fixture Wires
Fixture Loop
Main Frame
Socket
Assembly
Center Pipe
Finial
Carefully unpack and identify all parts
before assembly. Bulb is not included.
1. A. Thread fixture wires, which are located
above socket assembly, through center
pipe, top cover fixture loop.
  B. Install center pipe by screwing into
socket assembly.
  C. Install top end of center pipe by
screwing into top cover.
  D. Install fixture loop by screwing onto
top cover.
2. Slip candle cover onto sockets.
3. Install light bulb (not included). See
relamping label at socket area for type and
maximum allowed wattage.
4. Slide main frame up till it checks inside of
topcover. Lock into position by fastening
with finial.
5. Follow enclosed "Chain Suspended
FixtureInstallation Instructions" for
electrical andfixture installation onto
ceiling outlet box.