Owner manual

1
Installation Instructions for
River North 1 Light Outdoor Hanging Lantern
1.1
OL9811
Outdoor
OL9811_
GP I :ENERAL RODUCT NFORMATION
This product is listed by one of the following
ationally ecognized esting aboratory”NR TL
This product is suitable for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.
Slip the threaded nipple through the decorative frame, then place the decorative cup over the threaded nipple and secure
them together by tightening the finial.
Place the shade inside the decorative frame, install the tabs and secure the shade with the hex nuts, then place the fixture
top on the shade secure it with the washers and ball nuts.
Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.
1
2
1A
LAMP
3
4
SHADE
SOCKET
4
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
THREADED NIPPLE
FINIAL
DECORATIVE CUP
3
2
1
WASHER
BALL NUT
DECORATIVE FRAME
3
TAB
HEX NUT

Summary of content (4 pages)