User Manual

ManualsBrandsFeiss ManualsLightingP1270

Installation Instructions for

Urban Renewal 1 Light Mini Pendant

1.0

P1270

CAUTION - RISK OF FIRE

This product requires installation by a qualified electrician.

Before installing be sure to read all instructions and

TURNTHE POWERTOTHE ELECTRICAL BOX OFF.

Pendant

P1270_

GP I :ENERAL RODUCT NFORMATION

This product is suitable for dry locations only.

This product may be dimmed with a standard incandescent dimmer.

This instruction shows a typical installation.

Determine the height of the fixture with provided stems and assemble them by screwing them together.

Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.

Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.

Install glass shade by lining it up with the fixture and turning it to lock it in place.

LAMP

STEM ASSEMBLY

FIXTURE

GLASS SHADE

Summary of content (4 pages)

PAGE 1
Installation Instructions for P1270 Urban Renewal 1 Light Mini Pendant P1270_ 1.0 Pendant GENERAL PRODUCT INFORMATION: This product is suitable for dry locations only. This product may be dimmed with a standard incandescent dimmer. CAUTION - RISK OF FIRE This instruction shows a typical installation. This product requires installation by a qualified electrician. Before installing be sure to read all instructions and TURN THE POWER TO THE ELECTRICAL BOX OFF.
PAGE 2
ATTENTION – RISQUE D’INCENDIE Ce produit nécessite une installation par un électricien qualifié.Avant d'installer assurez-vous de lire toutes les instructions et TOURNER LE POUVOIR DE LA BOITE ELECTRIQUE OFF 1A 1 MONTAGE DE TIGE LUMINAIRE 3 AMPOULE 4 SHADE VERRE 1 Déterminez la hauteur de l'appareil avec des tiges fournis et les assembler en les vissant ensemble.
PAGE 3
PRECAUCION – RIESGO DE INCENDIO Este producto requiere la instalación por un electricista calificado.Antes de instalar, asegúrese de leer todas las instrucciones y APAGUE EL PODER DE LA CAJA ELÉCTRICA NO. 1A 1 STEM ASAMBLEA FIXTURE 3 BOMBILLA 4 SOMBRA DE CRISTAL 1 Determinar la altura del dispositivo de fijación con tallos proporcionados y ensamblarlos atornillándolos juntos.
PAGE 4
SAVE THESE INSTRUCTIONS! 555 Theodore Fremd Ave Suite B101 Rye, NY 10580 800.969.3347 www.Feiss.com © 2012 Feiss.All rights reserved.The "Feiss" graphic is a registered trademark of Feiss. Feiss reserves the right to change specifications for product improvements without notification.