User Manual

(E) REV 02/03/05
ASSEMB LY I NST R UCT I ONS FOR SF195
IMPORTANT
TURN OFF POWER AT MAIN FUSE OR
CIRCUIT BREAKER BOX BEFORE
STARTING INSTALLATION
 Carefully unpack and identify all parts
before assembly. Bulbs are not included.
1. Straighten arms in upright position as shown 
 in diagram.
2.  Take fixture wires that are located above 
 center pipe and thread through center body. 
 Then fasten center pipe by screwing onto 
 bottom of center body.
3. Lay glass shade inside of ring. Then install 
 ring onto bottom section of arms by fastening 
 with cap screw.
4. Install light bulb (not included). See relamping
 label located at socket area for type and
 maximum allowed wattage.
5. Follow enclosed “Multiple Standard
 Installation Instructions” for electrical and
 fixture installation onto ceiling outlet box.
MUR R AY FEI SS
©M UR R AY FEI SS I M PO RT LL C.
Fixture Plate
Center Body
Arm
Center Pipe
Bulb
(not included)
Glass Shade
Ring
Cap Screw