User Manual

(E) 4/06

IMPORTANT

TURN OFF THE POWER AT THE MAIN FUSE

OR CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

Carefully unpack and identify all parts before

assembly. Bulb not included.

1. Install center column by screwing securely into 

 fixture plate.

2. Install threaded stud by screwing into finial. Place  

 break on top of finial and then install them onto  

 bottom of glass shade by fastening with a flat  

 washer, lock washer, and hex nut from above.

 Do not over tighten.

3. Follow enclosed supplement installation   

 instructions for electrical and fixture installation

 onto house outlet box. If you do not have an

 outlet box at desired location to attach the fixture  

 than hire a qualified electrician to create one.

4.  Install bulbs (not included). See relamping label  

 located at socket area for type and maximum  

 allowed wattage.

5. A . Hang all arms onto hooks located at fixture plate.

B. Sit glass shade onto inside of support ring. Then 

 while firmly holding onto the support ring, hook  

 onto bottom section of each arms.

Fixture Plate

Suspension

Arm

Center Column

Glass Shade

ASSEMBLY INSTRUCTIONS FOR SF221

Break

Support Ring

Threaded Stud

Finial

Bulb

(not included)

Flat

Washer

Lock

Washer

Hex Nut