Manual

(E) REV 5/26/06

ASSEMB LY I NST R UCT I ONS FOR V S10902, V S10903,V S10904

IMPORTANT:

TURN OFF THE POWER AT THE MAIN

FUSE OR CIRCUIT BREAKER BOX

BEFORE STARTING INSTALLATION

1. Carefully unpack and identify all parts  

 before assembly. Bulbs are not included.

2. Before proceeding below instructions  

 follow enclosed “Multiple Standard  

 Installation Instructions” for electrical 

 and fixture installation onto wall

 outlet box.

3. Remove counter ring and spacer tube  

 from socket. Set them aside.

4. Install glass shade onto fitter and lock  

 into position by installing the spacer  

 tube and counter ring back onto the  

 socket.

5. Install light bulb (not installed). See  

 relamping label at socket area for type  

 and maximum allowed wattage.

6. Install finial and leaf onto fixture as

 shown at illustration.

Bulb

(Not Included)

Counter Ring

Spacer Tube

Glass Shade

Socket

Fitter

Finial

Spacer Tube

leaf

Cap Nut

MURRAY FEI SS

A Quality Home Brands Company®

VS10902

VS10903 & VS10904

PAGE 1
ASSEMBLY I NSTR UCTI ONS FOR V S10902, V S10903,V S10904 (E) REV 5/26/06 IMPORTANT: TURN OFF THE POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE STARTING INSTALLATION Fitter 1. Carefully unpack and identify all parts before assembly. Bulbs are not included. Socket 2. Before proceeding below instructions follow enclosed “Multiple Standard Installation Instructions” for electrical and fixture installation onto wall outlet box. Glass Shade 3. Remove counter ring and spacer tube from socket.