Manual

(E) REV: 12/03
READ ALL INSTRUCTIONS
BEFORE ASSEMBLING LAMP
 Carefully unpack lamp parts onto carpeted surface
or blanket and identify all parts.
1. Place Iron Frame onto Socket.
2. Place Glass Shade into Iron Frame. Secure by placing
Spacer Tube onto Socket.
3. Secure Glass Shade into place by fastening Counter
Ring onto Socket over Spacer Tube.
4. Screw Font onto Lamp Body.
5. Install a Type B, 60 Watt Max. Candelabra Base Bulb
(not included) into Socket as noted on relamping label at
Socket area.
6. ELECTRICAL PLUG IN:
Option 1: Plug onto existing wall outlet  
receptacle: Run wall bracket electrical wire down wall 
and plug into existing house wall outlet. Attach  
cord cover assembly to wall using supplied plastic 
anchor's. (see option 1)
IMPORTANT SAFETY INSTRUCTIONS:
 This portable lamp has a polarized plug (one blade is
wider than the other) as a safety feature to reduce the
risk of electric shock. This plug will fit in a polarized
outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit
contact a qualified electrician. Never use with a
extension cord unless plug can be fully inserted. Do
not attempt to defeat this safety feature.
MURRAY FEISS
©MURRAY FEISS IMPORT CORP.
ASSEMBLY INSTRUCTIONS FOR WB1206LBR
Bulb (not included)
Counter Ring
Spacer Tube
Glass Shade
Socket
Lamp Body
Iron Frame
Cord
Q-1333
WB1206LBR
Font
FIG. 1 (OPTION 1)
(6) Plastic Anchor
(6) Sheet Metal
Screws
(3) Inside Cover
(With Holes)
(4 Pcs)
Outside Cover