Installation Guide

(E) 4/07
ASSEMBLY INSTRUCTIONS FOR WB1331
Bulb
(not included)
Glass Shade
Socket
Cap Nut
Cap Screw
IMPORTANT
TURN OFF THE POWER AT THE MAIN FUSE
OR CIRCUIT BREAKER BOX
BEFORE STARTING INSTALLATION
Hex Nut
Washer
Finial
Fixture Plate
Carefully unpack and identify all parts
before assembly. Bulb is not included.
1. Follow enclosed “Multiple Standard
Installation Instructions” for electrical and
fixture installation onto wall outlet box.
2. Install threaded stud by screwing into
finial. Then install finial onto bottom of
shade by fastening with flat washer and
hex nut from above. Important: Do not
over tighten.
3. Install glass shade:
Install glass shade onto fixture plate by
inserting ball cap screws into holes at
both sides of glass shade and locking with
hex nut from other side. Do not over
tighten.
4. Install light bulb (not included). See
relamping label at socket area for type
and maximum allowed wattage.