Installation Guide

ManualsBrandsFeiss ManualsLightingFreemont 1-Light Hi Gloss Blue Wall Bracket

Installation Instructions for

Freemont 1 Light Wall

1.1

W 1726B

Wall

WB1726

Follow enclosed supplement installation instructions for electrical and fixture installation onto house outlet box.

Insert a bendable pin through the top of the frame and a decorative piece, then bend the pin into a hook like shape as

shown on drawing in order to securely hang the decorative piece; repeat for remaining decorative pieces.

Screw the lamp into the socket. Refer to the label on the lamp socket for Max Wattage information.

MOUNTING PLATE

CAUTION - RISK OF FIRE

This product must be installed in accordance with

the applicable installation code by a person familiar

with the construction and operation of the product

and the hazards involved.

Use minimum 90°c supply conductors.

DECORATIVE PIECE

FIXTURE

LAMP

BENDABLE PIN

GP I :ENERAL RODUCT NFORMATION

These fixtures are intended to be installed utilizing NEC compliant

junction boxes.

This product is safety listed for damp locations.

This product may be dimmed with a standard incandescent dimmer.

This instruction shows a typical installation.

Summary of content (4 pages)

PAGE 1
Installation Instructions for WB1726 Freemont 1 Light Wall WB1726 Wall GENERAL PRODUCT INFORMATION: These fixtures are intended to be installed utilizing NEC compliant junction boxes. CAUTION - RISK OF FIRE This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. This product is safety listed for damp locations. This product may be dimmed with a standard incandescent dimmer.
PAGE 2
ATTENTION : RISQUE D'INCENDIE Ce produit doit être installé conformément au code d'installation en vigueur par une personne familière avec la construction et l'exploitation du produit et les risques qu'il entraîne. Utiliser les conducteurs d'alimentation supérieure à 90° c. 1A LUMINAIRE 2 1 BROCHE PLIABLE PIÈCE DÉCORATIVE 2 PLAQUE DE MONTAGE AMPOULE 1 3 Suivez supplément ci-joint des instructions électriques et installation d'accessoires dans la boîte de prise de maison.
PAGE 3
PRECAUCIÓN: RIESGO DE INCENDIO Este producto debe instalarse de acuerdo con el código de instalación aplicable por una persona familiarizada con la construcción y operación del producto y los riesgos que conllevan. Utilizar conductores de suministro mínimo 90° c. 1A LÁMPARA 2 1 PIN DE FLEXIBLE PIEZA DECORATIVA 2 PLACA DE MONTAJE BOMBILLA 3 1 Siga las instrucciones de Instalación incluido suplemento para eléctricos e instalación del accesorio en la caja de enchufe de casa.
PAGE 4
SAVE THESE INSTRUCTIONS! 7400 Linder Ave, Skokie, IL 60077 800.969.3347 www.Feiss.com © 2015 Feiss.All rights reserved.The "Feiss" graphic is a registered trademark of Feiss. Feiss reserves the right to change specifications for product improvements without notification.