Installation Instructions

4
1.Introduction
The Homekit 82XX module with internal PCB printing antenna is MESH Bluetooth Low Energy (BLE) solution which
is fully Bluetooth 4.2 standard compliant and allows easy connectivity with Bluetooth Smart Ready devices.
Homekit 82XX module supports BLE slave and master mode operation, including broadcast, encryption,
connection updates, and channel map updates. It is RoHS-compliant and 100% lead (Pb)-free. With internal
512KBytes Flash and 16KB SDRAM are programmable for more applications, 14bits ADC with PGA, 6 channels
PWM, three quadrature decoders, GPIOs.8 pins are easy installation with removable to be an SMT module (PCB
stamp holes linking) in the mean time.
2.Features
● Bluetooth standard ：BLE4.2
● Frequency range: 2400~2483.5MHz
● RX :-96dBm@BLE 1Mbps,-99.5dBm@ IEEE802.15.4.250kbps,
● TX RF Power:up to +5.61dBm
● Network:Mesh
● power supply: 1.8V-3.6V
● RX MODE:5.3mA ,TX mode:4.8mA
● RSSI Monitoring
● Embedded LDO
● Battery monitoring:Supports low battery detection
● Low power consumption
● Support Bluetooth bulb lamp.flat lamp,tube lamp ,vacuum lamp,cabinet lamp
● support door magnetic,light sensor,microwave,pyroelectric,infiared sensor
● support Bluetooth smart socket and switch.
● support Apple Homekit with external DSP
● Embedded Hardware AES
● Operating Temperature range: ET Version: -40℃ ~ +85℃,
AT version: ‐40℃~+125℃
3. Applications
●Mesh intelligent dimming, Smart Devices Switch, Remote Control and 3D glasses LED Lighting control。
●This module can adjust light, color and switch control by 5PWM signal. Can achieve monotonic light, dimmer,
RGB
●Low power consumption long standby, you can use the button battery, with keyboard interface without external
MCU
●Smartphone accessories
● Wireless Microphone
● Health monitoring
● Sports and fitness tracking
● Wearable devices
● PC and tablet peripherals, including Mouse / Keyboard