SDS

----------------------------------------------------------------------------------------------------------------------------------------------------------
III. COMPOSITION – INFORMATION ON INGREDIENTS
----------------------------------------------------------------------------------------------------------------------------------------------------------
The following materials, unless specified otherwise, are part of the glass bulb portion of the CFL unit and the entire
CFL. The % weight, unless specified otherwise, is relative to the glass bulb portion of the CFL and the entire CFL
unit. If the glass bulb is broken, the following materials may be released:
Chemical Name
CAS
Number
% by wt.
Exposure Limits in Air
(mg/cubicm)
ACGIH (TLV)
OSHA
(PEL)
(1,2) Lead Solder (as Pb)
7439-92-1
0.1-<1.1
0.15
0.05
(1) Barium Peroxide
1304-29-6
0-<0.6
0.5
---
(1)Mercury
7439-97-6
<0.1
0.025
0.1
Ceiling
Sodium
7440-23-5
<0.01
---
---
Quartz, Fused
60676-86-0
10-30
0.1 Resp. Dust
0.1
(1,2)Glass (Lead Borosilicate)
---
50-75
10 (3)
15(3)
(1,2) (as Lead Oxide, 6%)
1317-36-8
---
0.15
0.05
Yttrium Vanadate
13566-12-6
0-<0.5
1.0
1.0
(1) These chemicals are subject to the reporting requirements of section 313 of Title III of the Superfund
Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
(2) The lead in this product is one f the substances known to the state of California to cause reproductive toxicity
if ingested. [California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65).]
(3) Limits as nuisance particulate.
------------------------------------------------------------------------------------------------------------------------------
Product Safety Data Sheet for FEIT ELECTRIC COMPANY brand Compact Fluorescent Lamps SDS No. 1.0
------------------------------------------------------------------------------------------------------------------------------