SDS

----------------------------------------------------------------------------------------------------------------------------------------------------------
IV. FIRST-AID MEASURES
----------------------------------------------------------------------------------------------------------------------------------------------------------
Contact, Skin: Thoroughly wash affected area with soap or detergent and water. Seek medical attention if needed.
Contact, Eye: Wash eyes, including under eyelids with water for 15 minutes. Seek medical attention. Glass
Cuts: Perform first aid procedures. Seek medical attention if needed.
Inhalation: If discomfort or irritation to the nose or throat develop, seek medical attention if needed. If
breathing has stopped, perform artificial respiration and seek medical attention at once.
Ingestion: In the unlikely event of ingesting significant CFL materials, seek medical attention immediately.
----------------------------------------------------------------------------------------------------------------------------------------------------------
V. FIRE-FIGHTING MEASURES
----------------------------------------------------------------------------------------------------------------------------------------------------------
Flammability: Non-combustible
Fire Extinguishing Materials: Use extinguishing agents suitable for surrounding fire.
Special Firefighting Procedure: Use a self-contained breathing apparatus to prevent inhalation of dust
and/or fumes that may be generated from broken lamps during firefighting activities.
Unusual Fire and Explosion Hazards: When exposed to high temperature, toxic fumes may be released from
broken lamps.
----------------------------------------------------------------------------------------------------------------------------------------------------------
VI. ACCIDENTAL RELEASE MEASURES
----------------------------------------------------------------------------------------------------------------------------------------------------------
ONLY APPLICABLE FOR BROKEN LAMPS
Ventilation: Use adequate general and local exhaust ventilation to maintain exposure levels below the PEL
or TLV limits. If such ventilation is unavailable, use respirators as specified below.
Respiratory Protection: Use appropriate NIOSH approved respirator if airborne dust concentrations exceed the
pertinent PEL or TLV limits. All appropriate requirements set forth in 29 CFR 1910.134 should be met.
Eye protection: OSHA specified safety glasses, goggles or face shield are recommended if lamps are being broken.
Protective clothing: OSHA specified cut and puncture-resistant gloves are recommended for dealing with broken
lamps.
Hygienic practices: After handling broken lamps, wash thoroughly before eating, smoking or handling
tobacco products, applying cosmetics, or using toilet facilities.
------------------------------------------------------------------------------------------------------------------------------
Product Safety Data Sheet for FEIT ELECTRIC COMPANY brand Compact Fluorescent Lamps SDS No. 1.0
------------------------------------------------------------------------------------------------------------------------------