SDS

Personal Protective Equipment: OSHA specified cut and puncture-resistant gloves are recommended for dealing
with broken lamps.
Eye Protection: OSHA specified safety glasses, goggles or face shield are recommended if lamps are bing
broken.
Skin Protection: After handling broken lamps, wash hands and face thoroughly before eating, drinking, smoking or
handling tobacco products, applying cosmetics, or using toilet facilities.
Respiratory Protection: Use appropriate NIOSH approved respirator if airborne dust concentrations exceed
the pertinent PEL or TLV limits. All appropriate requirements set forth in 29 CFR 1910.134 should be met.
----------------------------------------------------------------------------------------------------------------------------------------------------------
VIV. PHYSICAL AND CHEMICAL PROPERTIES
----------------------------------------------------------------------------------------------------------------------------------------------------------
NOT APPLICABLE FOR LAMPS
----------------------------------------------------------------------------------------------------------------------------------------------------------
X. STABILITY AND REACTIVITY
----------------------------------------------------------------------------------------------------------------------------------------------------------
NOT APPLICABLE FOR LAMPS
----------------------------------------------------------------------------------------------------------------------------------------------------------
XI. TOXICOLOGICAL INFORMATION
----------------------------------------------------------------------------------------------------------------------------------------------------------
THERE ARE NO KNOWN HEALTH HAZARDS FROM EXPOSURE TO LAMPS THAT ARE INTACT. No adverse
effects are expected from occasional exposure to broken lamps. As a matter of good practice, avoid prolonged or
frequent exposure to broken lamps unless there is adequate ventilation. The major hazard from broken lamps is
the possibility of sustaining glass cuts.
----------------------------------------------------------------------------------------------------------------------------------------------------------
XII. ECOLOGICAL INFORMATION
----------------------------------------------------------------------------------------------------------------------------------------------------------
NOT APPLICABLE FOR LAMPS
------------------------------------------------------------------------------------------------------------------------------
Product Safety Data Sheet for FEIT ELECTRIC COMPANY brand Compact Fluorescent Lamps SDS No. 1.0
------------------------------------------------------------------------------------------------------------------------------